Our experience enables us to provide the best design and
construction solutions to our customers, starting with poultry sheds,
providing the appropriate and ideal environment for raising birds,
reducing energy consumption, increasing bird density, and increasing
production cycles.
Steel
Steel structure ( Poultry house)
The structral details ( Poultry house)
Width of the house: A width of 14-12 meters is preferred. The greater
the width, the greater the number of fans. The length of the house is
increased according to the number of chickens.
Components of ( Poultry house)
- Columns
- Gables
- Purlins
- Cooling umbrella
- Doors
- Aluminium
- Thermal isulator
The structral details ( Poultry house)
They consist of bridges (beams) size 16-18-20. 240-400 cm long with
8-10 mm thick pallet for fastening Gable with columns with 3-6 mm
corners for attaching purlins, It is fixed to the bottom by a plate
measuring (20 * 20 cm) thick. 10 mm and has four perforations for
fixing with a stapler using Anker bold screws.
Gables ( Poultry house )
It consists of bridges 16-18-20 cm, with 3-6 mm bits for attaching the
purlins to the perforation of the trusses from the sides have four 18
mm punches for each side to fix them with columns with plates in
the middle, thickness 8-10 mm, number of two for each gable to
form a complete gable, and the gables are of a height
5.3 mm in the middle.
Purlins ( Poultry house )
a – American purlins
b – Dutch purlins
c – Saudi purlins
M x 35 x 18 x 3 Thickness 2-25.1 mm, with perforation on both sides
to connect the columns and trusses, taking into account the number
of supports in the roof and the support And the side (corner + 2
purlins + c purlins).
Cooling pad area ( Poultry house )
25-40 m long on each side. The barn’s cooling frame consists of upper and lower tubes of the same size as1.5mm thickness (80mm x 40mm)
Doors ( Poultry house )
Five single, insulated doors for each barn The height of the door is 2 * 1 m and the number of doors is 2 Father Double insulated, single height 2*2 m double door the height of each one is 3 * 3 m, and they are all made of thick aluminium 0.8 mm and on tubes 40*40*1.5 mm injected with a layer Insulation (foam).
Aluminum ( Poultry house )
A – Internal aluminum: Aluminum with granular ribbed thickness of The interior is 0.5 mm and has a crevice where the column meets the gable. On both sides of the barn, there is also a curve in the middle of the barn roof. B – External aluminum: External aluminum thickness is 0.6mm. Thickness: 5 mm When installing internal and external aluminum, consideration should be given to the areas Technical method for sealing by installing the bar. Silicone, foam, and rubber. In addition to colored flashing (red -Blue-orange) for covering bridges and pipes C – Insulation: Supply of thermal insulation made of glass wool 10 cm thickness with a density of 12 kg/cubic meter for placement Between the inner and outer layers.
Insulation ( Poultry house )
Supply of thermal insulation made of glass wool, 10 cm thick With a density of 12 kg/cubic meter, it should be placed between the two inner layers. And externa
Other ( Poultry house )
- An alternative aluminum sandwich panel is used for walls with athickness of 5 cm
- The ceiling is 7.5 cm thick
- The exposed ceiling shall be covered from above or below in case of The sandwich panel has a 0.5 mm thick aluminum layer to cover the bridges.
Cover ( Roof and Panels)
Roof, Wall panels and Accessories
Pre-Painted Corrugated Galvanized Panel
- Rain Gutter, Ridge Cap, Flashing, Crimped
- Corrugated sheet and Roof
- Rain Gutter
Alternatively, our quality products can be specifically produced and
fabricated according to the desire and preference such as coating,
finish, thickness, dimension and other description.
Flashing (Drip Edge)
Ridge Cap
